34011
Masimo Radical-7 Handheld Non-locking Latch Replacement
BY Masimo
Special Price
$7,074.00
Regular Price
$8,842.50
Radical-7 Handheld Non-locking Latch Replacement
Need replacement parts & accessories? Shop Now >
888.425.5763
Skip to the end of the images gallery
888.425.5763
Skip to the beginning of the images gallery
Used for installation of Radical-7 Color Handheld Newer Generation into the docking station.
Will not fit the Radical or the original Radical-7 see PN 30212
Also note that ideally the serial number should be supplied and verified when ordered. Masimo has a variety latches for the Radical-7 series.
Replacing the non-locking latch on a Masimo Radical-7 handheld device should be done with care to ensure proper functionality and safety. Here's a general guide on how you might approach this task:
1. Obtain Replacement Part: First, ensure you have the correct replacement part for the non-locking latch. You may need to contact the manufacturer or an authorized distributor to acquire this part.
2. Prepare Workspace: Find a clean and well-lit area to work on the device. Lay down a soft cloth or towel to protect the screen and casing from scratches or damage.
3. Power Off Device: Before beginning any repairs, power off the Masimo Radical-7 device and disconnect any power sources or cables.
4. Remove Old Latch: Carefully examine the existing latch to understand how it's attached to the device. Typically, there will be screws or other fasteners holding it in place. Use appropriate tools, such as screwdrivers or pliers, to carefully remove these fasteners without damaging the device.
5. Install Replacement Latch: Once the old latch is removed, position the replacement latch in its place. Ensure it aligns correctly with the housing of the device. Use the same screws or fasteners to secure the new latch in place. Be cautious not to overtighten the screws, as this could damage the latch or the device casing.
6. Test Functionality: After installing the replacement latch, perform a functionality test to ensure it operates smoothly and securely. Open and close the latch several times to verify that it locks and unlocks properly.
7. Reassemble Device: Once you're satisfied with the replacement latch's installation and functionality, reassemble any parts of the device that were removed during the process. Ensure all screws and fasteners are tightened securely, but not excessively.
8. Final Check: Before returning the device to service, perform a final inspection to ensure everything is in place and properly assembled. Clean the device if necessary to remove any fingerprints or debris.
9. Power On: Reconnect any power sources or cables, and power on the Masimo Radical-7 device. Verify that it functions correctly, including any features related to the replaced latch.
| Size | Default |
|---|---|
| Discontinued Status | No |
| Reference Only | No |
| Manufacturer | Masimo |
| Prescription required | No |
Write Your Own Review